about 1 year ago - 5 comments
Here is the resetter program for Epson Stylus Photo R220 and R230.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 2 years ago - 17 comments
This resetter can reset the protection counter for Epson Stylus C67, C68 and D68 printer. Just select your printer at the first list as shown below.
Next, select “The Upper Housing is Installed” at the third list.
Click “Ok” button and it will show the screen like below.
Select “Waste pad ink counter” and click “Ok” button to More >
about 2 years ago - 13 comments
Here is the resetter program for Epson Stylus Photo 1390.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” More >
about 2 years ago - 1 comment
Follow these steps below to reset the protection counter for printer mentioned above.
Turn OFF the printer.
Press B/W + Color + Stop button together and hold
Press Power ON button and hold (4 buttons on hold now and don’t release the buttons until you see the light indicator is blinking. A message will be displayed on the More >
about 2 years ago - 18 comments
Here is the resetter program for Epson Stylus Photo R270.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” More >
about 2 years ago - 2 comments
Here is the resetter program for Epson Stylus CX3900.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” file.
This More >
about 2 years ago - No comments
Some resetter programs may not work to reset protection counter for your printer.
Try following steps below but it depends on the printer model.
Epson Photo R200, R210, R300, R310
Press and hold “Stop” button, follow by “Maintenance” and “Power” button together for 10 seconds.
Turn off the printer and unplug the printer for 1 minute.
Turn back on the More >
about 2 years ago - 1 comment
Follow step by step below in order to reset protection counter for Epson C58.
Make sure you printer is ON and connected to your computer.
Change your computer’s date to 9 Nov 2006. (This is a key step)
Run AdjProg.exe file.
Click “Accept” button.
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” More >
about 2 years ago - 1 comment
In previous post, it made� some confusion to peoples so I review and write an individual post that tackles protection counter issue for Epson C79 printer only.
In order for you to reset protection counter successfully, you must follow step by step provided below. Once it executed and you encountered a problem, you have to perform More >
about 3 years ago - 4 comments
For those who has Epson Stylus C79, Epson Stylus Photo R270 or Epson Stylus CX3900 (All-in-one), you can reset the protection counter without any software.
Follow this steps and the protection counter will be resetted.
Switch off the printer
Switch on the printer
Press once the ink button
Printer head move to left side
Press the ink button again
Printer head move More >
about 1 year ago
i downloaded the program to reset R290 but upon trying to the program it is saying the program cannot be used. help me what could be the problem am i not doing it the right way or what coz i followed the steps by deactivating my antivirus then run it not workd
about 1 year ago
after dowlding i opened the zipped folder and tried to the AdjProg,it said this application depend on other compreesd files in this folder., for the application to run properly, it is recomended that you first extract all files, and i accepted, then after that i found the AdjProg(adjustmet program for Epson r290 and double clicked to run)then said the programn cannot be used.
about 1 year ago
Ok may be the problem could be that am trying this program while the printer is not there let get the printer tomorow to try again thank you and i will get back to yuo.
about 1 year ago
Hi, I found your blog on this new directory of WordPress Blogs at blackhatbootcamp.com/listofwordpressblogs. I dont know how your blog came up, must have been a typo, i duno. Anyways, I just clicked it and here I am. Your blog looks good. Have a nice day. James.
about 1 year ago
I downloaded the reseteing software.It is working fine.But I get suprised because I expected the ink level on cartridges to show full after reseteing,but they remained at the same level!How the refilling can be successful when the intelligent chip is not reseted to full?
Please help me on that.
about 1 year ago
Hi Leonidas,
Resetting software is not related to resetting ink level on cartridges. Resetting software is help you to reset the protection counter. If you don’t know what it’s all about, read “What is protection counter” article at this blog.
If you want to reset the ink level of the cartridge, you need a tool name chip resetter, that available in the market.
about 1 year ago
I extracted all files, reset the computer clock to 01-04-2008 but there is no accept button. When I hit Enter it seems to close that window which should be left open
When I click Particular Adjustment mode button it prompts me to “run’ this and then all 4 files disappear and I am left with a blank window
Help me please!!!
about 1 year ago
Thanks for the useful info. It’s so interesting
about 1 year ago
many thanks…
after weeks of trying…i’ve got it
i won’t bring my printer to the service station anymore and pay 250 just for resetting!
thanx again