about 1 year ago - 9 comments
Here is the resetter program for Epson Stylus Photo R290 as requested.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 1 year ago - 5 comments
Here is the resetter program for Epson Stylus Photo R220 and R230.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 2 years ago - 17 comments
This resetter can reset the protection counter for Epson Stylus C67, C68 and D68 printer. Just select your printer at the first list as shown below.
Next, select “The Upper Housing is Installed” at the third list.
Click “Ok” button and it will show the screen like below.
Select “Waste pad ink counter” and click “Ok” button to More >
about 2 years ago - 13 comments
Here is the resetter program for Epson Stylus Photo 1390.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” More >
about 2 years ago - 1 comment
Follow these steps below to reset the protection counter for printer mentioned above.
Turn OFF the printer.
Press B/W + Color + Stop button together and hold
Press Power ON button and hold (4 buttons on hold now and don’t release the buttons until you see the light indicator is blinking. A message will be displayed on the More >
about 2 years ago - 2 comments
Here is the resetter program for Epson Stylus CX3900.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” file.
This More >
about 2 years ago - No comments
Some resetter programs may not work to reset protection counter for your printer.
Try following steps below but it depends on the printer model.
Epson Photo R200, R210, R300, R310
Press and hold “Stop” button, follow by “Maintenance” and “Power” button together for 10 seconds.
Turn off the printer and unplug the printer for 1 minute.
Turn back on the More >
about 2 years ago - 1 comment
Follow step by step below in order to reset protection counter for Epson C58.
Make sure you printer is ON and connected to your computer.
Change your computer’s date to 9 Nov 2006. (This is a key step)
Run AdjProg.exe file.
Click “Accept” button.
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” More >
about 2 years ago - 1 comment
In previous post, it madeďż˝ some confusion to peoples so I review and write an individual post that tackles protection counter issue for Epson C79 printer only.
In order for you to reset protection counter successfully, you must follow step by step provided below. Once it executed and you encountered a problem, you have to perform More >
about 3 years ago - 4 comments
For those who has Epson Stylus C79, Epson Stylus Photo R270 or Epson Stylus CX3900 (All-in-one), you can reset the protection counter without any software.
Follow this steps and the protection counter will be resetted.
Switch off the printer
Switch on the printer
Press once the ink button
Printer head move to left side
Press the ink button again
Printer head move More >
about 2 years ago
Hi! I was very glad to find thie site, the instructions are very clear but it didn´t work the resetter program for my Epson Stylus Photo R270. I don´t know why, perhaps because it is a new model… I’ve got no idea.
If you know somethig else about it I’ll thank you a lot!!!
about 2 years ago
Could you tell me which step that failed and what the error message you get? Thanks.
about 2 years ago
Hi, my R270 is having service error, maintanance required problem. My supplier asked me to bring them the printer and they can help me to reset and they will charge me 50 bucks. But I would like to try if there is a way to reset the printer by myself, could you please kindly advice me? Thanks.
about 2 years ago
Dear friends,
I just purchased an Epson Stylus r270, and I loaded a remote continuous feeding ink.
The R270, was started to print really OK, with a very good standard, since some photos was appearing not much clear.
So I decided to use the printer functions to clean the nozzle and the print head.
In addition with an absorbent paper, manually I tried to dry from the ink, the black sponge below the head.
I did this operation with the print OFF, but when I made ON, the head went quick against the right side of the printer with a strong noise and the two red light, paper and ink, started to blinking rapidly.
I try to follow the instruction of the Adjustment Program, downloaded from the net, and following the suggestions, to open the right side of the printer to empty the waste (the thank was empty, not one drop of ink was coming out) , the red light was keeping on.
When the red light are on, the green one is off, but the light inside in the left side of the print is on.
With the Adjustment Program, I obtained all the time: “FATAL ERROR CODE 0 x 50”
And “CANNOT SEEK CR HOME POSITION”
I would like very pleased if you can help me.
Thanking you in advance,
Kindest Regards
Daniel
about 2 years ago
Hi Daniel,
Have you moved the print-head back to orginal position after you clean the sponge below the head? Probably, this was the cause of the printer faulty when you turned back ON.
It should be all right when you restart the printer. If not, I suggest, you bring to the service center after you take out the continuous inking system.
Hope this help.
about 2 years ago
Hi,
Worked great! Thanks.
(P.S. do I need to remove the ink from the waste pad???)
about 2 years ago
Hi Celadore,
You should do that, but it is not an easy task to do that.
If you did it for the first time, I think it should be all right.
Bring to service center if your printer is still under warranty and make sure you put genuine cartridge on it.
about 2 years ago
Hi!
Im having problems with the software.
it says, communication error.
does this work in windows vista?
thanks!
about 2 years ago
jasper,
I don’t think it work for vista. Many resetter programs are not ready for vista yet. Perhaps you can reset the counter manually by pressing buttons in your printer.
Refer to this post, try to find similar button at your printer. Hope this help.
http://www.refillingcartridge.com/index.php/archives/reset-protection-counter-without-software/
about 1 year ago
Well done I’m so glad I found you .. the resetter works 110% THANKYOU VERY MUCH ….KIMI….
about 1 year ago
Hi, I lost my light magenta color. Whats wrong with my r270 printer?
thanks.
about 1 year ago
Hi Rei,
Please make sure that you have enough light magenta ink inside your cartridge or not dried up.
Next, follow the instruction at http://www.refillingcartridge.com/index.php/archives/the-right-way-of-doing-head-cleaning/
Hope this help
about 1 year ago
Thankssssssss…. Very good!!!!!!
about 1 year ago
hi
i have one problem general error my printer how to clear this error and ink does not charging please send me solution.
about 1 year ago
dear sir
i have an Epson 1390 inkjet printer and is giving me the following error The print head is obstructed by jammed paper or other foreign material and cannot return to the home position.
i have cleared the jamed papar and also have done Waste ink pad counter
any suggestions
about 1 year ago
Hi Mathias,
I dont have an exact answer for this. You can turn off the printer and move gently the print head to home position by hand.
Hope this help. Cheers
about 1 year ago
no that did not help sir;do i have to open the printer and look for rollers that are dammaged?
please any suggestion is greatly appreciated
about 11 months ago
dear sir
i have an Epson 1390 inkjet printer and is giving me the following error The print head is obstructed by jammed paper or other foreign material (blinking in paper n inktank). i use adjusment program n it say PF or PV sensor error .
what should i do..
sorry i cannot English well