about 1 year ago - 9 comments
Here is the resetter program for Epson Stylus Photo R290 as requested.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 1 year ago - 5 comments
Here is the resetter program for Epson Stylus Photo R220 and R230.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 2 years ago - 17 comments
This resetter can reset the protection counter for Epson Stylus C67, C68 and D68 printer. Just select your printer at the first list as shown below.
Next, select “The Upper Housing is Installed” at the third list.
Click “Ok” button and it will show the screen like below.
Select “Waste pad ink counter” and click “Ok” button to More >
about 2 years ago - 13 comments
Here is the resetter program for Epson Stylus Photo 1390.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” More >
about 2 years ago - 1 comment
Follow these steps below to reset the protection counter for printer mentioned above.
Turn OFF the printer.
Press B/W + Color + Stop button together and hold
Press Power ON button and hold (4 buttons on hold now and don’t release the buttons until you see the light indicator is blinking. A message will be displayed on the More >
about 2 years ago - 18 comments
Here is the resetter program for Epson Stylus Photo R270.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” More >
about 2 years ago - 2 comments
Here is the resetter program for Epson Stylus CX3900.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” file.
This More >
about 2 years ago - No comments
Some resetter programs may not work to reset protection counter for your printer.
Try following steps below but it depends on the printer model.
Epson Photo R200, R210, R300, R310
Press and hold “Stop” button, follow by “Maintenance” and “Power” button together for 10 seconds.
Turn off the printer and unplug the printer for 1 minute.
Turn back on the More >
about 2 years ago - 1 comment
Follow step by step below in order to reset protection counter for Epson C58.
Make sure you printer is ON and connected to your computer.
Change your computer’s date to 9 Nov 2006. (This is a key step)
Run AdjProg.exe file.
Click “Accept” button.
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” More >
about 2 years ago - 1 comment
In previous post, it made� some confusion to peoples so I review and write an individual post that tackles protection counter issue for Epson C79 printer only.
In order for you to reset protection counter successfully, you must follow step by step provided below. Once it executed and you encountered a problem, you have to perform More >
about 3 years ago
Had a EpsonR210 useless because of waste ink counter. Been looking for weeks to find reset programme. Came upon your web site – Presto! there it was. Five minutes – had the printer talking to me!
Thank you in the highest!
Best regards K.McI.
about 3 years ago
Thank you!
My R210 now is back to normal and I plan to install waste ink bottle.
I’d tried other tech’s (like pressing combination of maintenance + paper + start buttons) but unsuccessful.
I’ll recommend yr site.
Thanks.
about 2 years ago
I also tried the pressing a variation of buttons and power on/off combinations to no avail. Your program is the BEST.
thank you I would highly recommend your site.
about 2 years ago
This is a fine program… thank you for sharing it us… but I really need to reset the ink cartridge… any idea??
about 2 years ago
I’m using CiS for my R210. but it’s always printed badly (sometime some color just can’t get out) after the ink level reset2full.
it will fine again after I reinstall the windows.
(I’m using xp sp2)
but when I try vista (w/ vista build-in drivers), it print good and with out trouble like those aboves. unfortunally vista drivers doesn’t support cd tray printing. what should I do?
btw, sory if my english is bad. I’m an Indonesian
about 2 years ago
Hi rifai,
I believe that your problem is not related to the operating system you use. The missing color problem you have is caused by the dried ink in the print-head. Print-head cleaning will solve the problem. Please refer to the article below to perform print-head cleaning effectively.
http://www.refillingcartridge.com/index.php/archives/the-right-way-of-doing-head-cleaning/
about 1 year ago
hi,, do they have a software for my old printer epson stylus c45 which is T038 black cartridge? i think my case need to reset the chip of the cartridge but i don’t have a resetter gadget. can u send me if you have software for my epson.. thanks a lot in advance..
i hope you can help to solved my problem to my printer .. mon
about 1 year ago
hi, i have a epson R10 that i use for sublimation ..please help me as out of my 6 colours continuously fed in, my two reds have stopped..i installed and performed the RESET thingy, and now the reds seems to be..drying up..!!? there are no air bubbles in the line ..ink flow seems good..i have taken out the fine filter/nozzle and cleaned it..but when it comes to a head clean there is no red..agghhh
pls help me
about 1 year ago
yes you can email me that would be good..thank you
about 1 year ago
Fixed my flashing red lights with out a trip to Epson. Thanks for the help…………
about 1 year ago
Annie,
If your printer could not print all the colors, looks like your print head clogged badly.
Please try to follow the instruction that I put in at link below to resolve the issue. http://www.refillingcartridge.com/index.php/archives/the-right-way-of-doing-head-cleaning/
Hope this help, sorry, I can’t your email address.
about 1 year ago
George,
Glad to hear that, thanks for the feedback.
about 1 year ago
hi again, thanks for your advice. will soak it and see how i go..
annie
about 1 year ago
THANK YOU !!! Worked like a charm – thank you so very much, now I can print again!
about 1 year ago
Hello webmaster
I would like to share with you a link to your site
write me here preonrelt@mail.ru
about 1 year ago
THANK YOU !!!
about 2 months ago
Awesome program! Worked well, thanks!!!!!!
about 1 week ago
Wanted to thank you for your program, it has my r200 working again!
about 2 days ago
Hi it has been a year since I last used my epson R210 and I want to know if the ink will be ok and if so what process should I follow to get printer up and runnig tku
about 1 day ago
I suggest you get a new cartridge especially the black color.
Your ink may dry when you are not using it.