Reset Protection Counter for Epson C67, C68 and D68
This resetter can reset the protection counter for Epson Stylus C67, C68 and D68 printer. Just select your printer at the first list as shown below.
Next, select “The Upper Housing is Installed” at the third list.
Click “Ok” button and it will show the screen like below.
Select “Waste pad ink counter” and click “Ok” button to proceed.
Click “Initialization” button and it will reset your protection counter.
Bear in mind that you are supposed to clean the waste pad before you reset the protection counter. Read related post for more detail.
Related Posts
| Print article |
Comments are closed.
about 2 years ago
where can i find
“Reset Protection Counter for Epson Stylus Photo R230″
can u post it the link…
tnx in advance..
about 2 years ago
Hi Melvine,
You can download it from http://www.refillingcartridge.com/index.php/archives/reset-protection-counter-for-epson-r220-and-r230/
about 1 year ago
Dear All
Epson D68 printer flagged up service/maintenance warning then stopped altogether with two flashing red lights on top of printer
Contacted Epson for advice as was advised to have printer serviced and/or replaced even though nothng wrong with it
Went off line in disgust and then contacted a local agent who provided me with your address
Downloaded programme and reset printer with no difficulty All now well
Thanks
Clive
about 1 year ago
Hi – I downloaded the file as a zip file,but I cannot figure out how to actually run the software. Can you help?
thanks Robert
about 1 year ago
Have you extracted the zip file? It contains many files inside. You can download the winzip program at winzip.com. After that just execute the program named APSC68Series_Ver10.exe.
Hope this help
Cheers
about 1 year ago
Thanks – I got as far as the input box to “read” the original setting, however it came up with an error message : communication error code 20000010
The printer is flashing red lights on “ink out” and “paper out” warning lights. Does this mean it is totally locked and unresponsive to any input from my computer? If I hold down the switch on button I can get a green power light when I switch on at the wall, but it is still not letting me get a connection.
Any help with this would be greatly appreciated.
thanks
Robert
about 1 year ago
Hi Robert,
I hope that you downloaded the right program and choose the right printer when you try to reset the protection counter.
I don’t see any other issue except the connection between your computer and printer. Try to install printer status monitor software that come with your printer purchase. Verify that you get the error message that said part of your printer has end of life or something similar to that.
If yes, that this software that you download will do the job. Beside that, it’s quite hard for me to guess what is the problem there.
Hope this help.
Cheers
about 1 year ago
Hi – many thanks for your help – it was the connection from my computer to the printer!
The programme worked a treat.
best regards
Robert
about 1 year ago
your welcome.
Glad to hear that.
Cheers
about 1 year ago
BJ COMMENT FAIRE UNE RESET POUR UNE IMPRIMANTE D78
EPSON
REST COMPTEURS
MERCI A VOUS DE REPONDRE
about 1 year ago
BJ COMMENT FAIRE UNE RESET POUR UNE IMPRIMANTE D78
EPSON
REST COMPTEURS
MERCI A VOUS DE REPONDRE
about 1 year ago
Hi,
Your program was worked. Thanks
about 1 year ago
BJ COMMENT FAIRE UNE RESET POUR UNE IMPRIMANTE EPSON STYLUS D78
REST COMPTEURS
MERCI POUR VOTRE REPONSE
about 1 year ago
anyone have a reset for the D78. lots of sites via google link to this page but cant find the d78 one anywhere
cheers
about 5 months ago
Hi all.. I am from chile.. soo my english is not very good.
I have the prolbem of communication error.
Im working on Win7.. THere is compatibility issues!?
Thanks
about 5 months ago
If you can run the program, I believe you have no issue on that.
Communication error mostly due to connection from your computer to your printer. Check your cable, switch on your printer first then your computer and try again.
Help this help.
about 3 months ago
I STILL HAVE PROBLEM : communication error code 20000010
anyone can help???
thanks
about 1 month ago
I’ve the same problem too with my D78!! ><