about 1 year ago - 9 comments
Here is the resetter program for Epson Stylus Photo R290 as requested.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 1 year ago - 5 comments
Here is the resetter program for Epson Stylus Photo R220 and R230.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 2 years ago - 13 comments
Here is the resetter program for Epson Stylus Photo 1390.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” More >
about 2 years ago - 1 comment
Follow these steps below to reset the protection counter for printer mentioned above.
Turn OFF the printer.
Press B/W + Color + Stop button together and hold
Press Power ON button and hold (4 buttons on hold now and don’t release the buttons until you see the light indicator is blinking. A message will be displayed on the More >
about 2 years ago - 18 comments
Here is the resetter program for Epson Stylus Photo R270.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” More >
about 2 years ago - 2 comments
Here is the resetter program for Epson Stylus CX3900.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” file.
This More >
about 2 years ago - No comments
Some resetter programs may not work to reset protection counter for your printer.
Try following steps below but it depends on the printer model.
Epson Photo R200, R210, R300, R310
Press and hold “Stop” button, follow by “Maintenance” and “Power” button together for 10 seconds.
Turn off the printer and unplug the printer for 1 minute.
Turn back on the More >
about 2 years ago - 1 comment
Follow step by step below in order to reset protection counter for Epson C58.
Make sure you printer is ON and connected to your computer.
Change your computer’s date to 9 Nov 2006. (This is a key step)
Run AdjProg.exe file.
Click “Accept” button.
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” More >
about 2 years ago - 1 comment
In previous post, it made� some confusion to peoples so I review and write an individual post that tackles protection counter issue for Epson C79 printer only.
In order for you to reset protection counter successfully, you must follow step by step provided below. Once it executed and you encountered a problem, you have to perform More >
about 3 years ago - 4 comments
For those who has Epson Stylus C79, Epson Stylus Photo R270 or Epson Stylus CX3900 (All-in-one), you can reset the protection counter without any software.
Follow this steps and the protection counter will be resetted.
Switch off the printer
Switch on the printer
Press once the ink button
Printer head move to left side
Press the ink button again
Printer head move More >
about 1 year ago
where can i find
“Reset Protection Counter for Epson Stylus Photo R230″
can u post it the link…
tnx in advance..
about 1 year ago
Hi Melvine,
You can download it from http://www.refillingcartridge.com/index.php/archives/reset-protection-counter-for-epson-r220-and-r230/
about 1 year ago
Dear All
Epson D68 printer flagged up service/maintenance warning then stopped altogether with two flashing red lights on top of printer
Contacted Epson for advice as was advised to have printer serviced and/or replaced even though nothng wrong with it
Went off line in disgust and then contacted a local agent who provided me with your address
Downloaded programme and reset printer with no difficulty All now well
Thanks
Clive
about 1 year ago
Hi – I downloaded the file as a zip file,but I cannot figure out how to actually run the software. Can you help?
thanks Robert
about 1 year ago
Have you extracted the zip file? It contains many files inside. You can download the winzip program at winzip.com. After that just execute the program named APSC68Series_Ver10.exe.
Hope this help
Cheers
about 1 year ago
Thanks – I got as far as the input box to “read” the original setting, however it came up with an error message : communication error code 20000010
The printer is flashing red lights on “ink out” and “paper out” warning lights. Does this mean it is totally locked and unresponsive to any input from my computer? If I hold down the switch on button I can get a green power light when I switch on at the wall, but it is still not letting me get a connection.
Any help with this would be greatly appreciated.
thanks
Robert
about 1 year ago
Hi Robert,
I hope that you downloaded the right program and choose the right printer when you try to reset the protection counter.
I don’t see any other issue except the connection between your computer and printer. Try to install printer status monitor software that come with your printer purchase. Verify that you get the error message that said part of your printer has end of life or something similar to that.
If yes, that this software that you download will do the job. Beside that, it’s quite hard for me to guess what is the problem there.
Hope this help.
Cheers
about 1 year ago
Hi – many thanks for your help – it was the connection from my computer to the printer!
The programme worked a treat.
best regards
Robert
about 1 year ago
your welcome.
Glad to hear that.
Cheers
about 1 year ago
BJ COMMENT FAIRE UNE RESET POUR UNE IMPRIMANTE D78
EPSON
REST COMPTEURS
MERCI A VOUS DE REPONDRE
about 1 year ago
BJ COMMENT FAIRE UNE RESET POUR UNE IMPRIMANTE D78
EPSON
REST COMPTEURS
MERCI A VOUS DE REPONDRE
about 1 year ago
Hi,
Your program was worked. Thanks
about 1 year ago
BJ COMMENT FAIRE UNE RESET POUR UNE IMPRIMANTE EPSON STYLUS D78
REST COMPTEURS
MERCI POUR VOTRE REPONSE
about 1 year ago
anyone have a reset for the D78. lots of sites via google link to this page but cant find the d78 one anywhere
cheers
about 4 months ago
Hi all.. I am from chile.. soo my english is not very good.
I have the prolbem of communication error.
Im working on Win7.. THere is compatibility issues!?
Thanks
about 4 months ago
If you can run the program, I believe you have no issue on that.
Communication error mostly due to connection from your computer to your printer. Check your cable, switch on your printer first then your computer and try again.
Help this help.
about 1 month ago
I STILL HAVE PROBLEM : communication error code 20000010
anyone can help???
thanks