about 1 year ago - 9 comments
Here is the resetter program for Epson Stylus Photo R290 as requested.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 1 year ago - 5 comments
Here is the resetter program for Epson Stylus Photo R220 and R230.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your More >
about 2 years ago - 17 comments
This resetter can reset the protection counter for Epson Stylus C67, C68 and D68 printer. Just select your printer at the first list as shown below.
Next, select “The Upper Housing is Installed” at the third list.
Click “Ok” button and it will show the screen like below.
Select “Waste pad ink counter” and click “Ok” button to More >
about 2 years ago - 1 comment
Follow these steps below to reset the protection counter for printer mentioned above.
Turn OFF the printer.
Press B/W + Color + Stop button together and hold
Press Power ON button and hold (4 buttons on hold now and don’t release the buttons until you see the light indicator is blinking. A message will be displayed on the More >
about 2 years ago - 18 comments
Here is the resetter program for Epson Stylus Photo R270.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” More >
about 2 years ago - 2 comments
Here is the resetter program for Epson Stylus CX3900.
Please follow the steps below to reset the protection counter effectively.
If you have any anti virus software, please deactivate first.
The resetter software (adjprog.exe) requires specific date to run and your anti virus will prevent that.
Make sure you printer is ON and connected to your computer.
Run “Start.bat” file.
This More >
about 2 years ago - No comments
Some resetter programs may not work to reset protection counter for your printer.
Try following steps below but it depends on the printer model.
Epson Photo R200, R210, R300, R310
Press and hold “Stop” button, follow by “Maintenance” and “Power” button together for 10 seconds.
Turn off the printer and unplug the printer for 1 minute.
Turn back on the More >
about 2 years ago - 1 comment
Follow step by step below in order to reset protection counter for Epson C58.
Make sure you printer is ON and connected to your computer.
Change your computer’s date to 9 Nov 2006. (This is a key step)
Run AdjProg.exe file.
Click “Accept” button.
Click “Particular adjustment mode” button.
Select on “Waste ink pad counter” and click “OK” button.
Click on “Initialization” More >
about 2 years ago - 1 comment
In previous post, it made� some confusion to peoples so I review and write an individual post that tackles protection counter issue for Epson C79 printer only.
In order for you to reset protection counter successfully, you must follow step by step provided below. Once it executed and you encountered a problem, you have to perform More >
about 3 years ago - 4 comments
For those who has Epson Stylus C79, Epson Stylus Photo R270 or Epson Stylus CX3900 (All-in-one), you can reset the protection counter without any software.
Follow this steps and the protection counter will be resetted.
Switch off the printer
Switch on the printer
Press once the ink button
Printer head move to left side
Press the ink button again
Printer head move More >
about 2 years ago
Hi, I already downloaded Reset Protection Counter for Epson 1390 for my printer. I run it and follow follow the steps below to reset the protection counter. But still nothing happen to my printer. I used window vista OS.
Thanks
about 2 years ago
Did the software run properly or failed to launch in the first place? Thanks.
about 2 years ago
i want to download … 1390 ???
about 2 years ago
just click Download icon above.
about 1 year ago
Hi,
I’ve downloaded the software and followed all instructed steps to reset protection counter of my Epson 1390 but nothing happens.
Could you please tell me how to open the printer to clean the waste pad/sponge? Is there 2 sponges/wastes pads in the 1390, one in the right and one in the left?
How many times we can clean the sponge before we have to change it?
Is there any way to avoid the problem when the sponge is not able to absorb ink anymore – for example: we clean and absorb the ink in the sponge in order to keep the sponge dry and be able to absorb ink more?
Thank you so much! Your site is very helpful!
Best regards!
about 1 year ago
Hi,
Please reconfirm your printer whether the problem is waste pad full.
Cleaning the waste pad/sponge is not an easy task for most of end users. For this model, the waste pad is located at the bottom of the printer. You may need to dismantle the printer body to access them. I suggest that you bring the printer to epson service center or printer technician.
If you encounter this problem for a first time, most of the case, the sponge has not saturated yet, so it’s safe to reset it. The software provided at this post is supposed to reset it. Try to unplug the printer cable for a while and start again.
Try to read what is the value of protection counter you have now to verify the software can access the printer’s memory.
Hope this help.
Note: If the software doesn’t work, could you tell me what is the operating system you use.
about 1 year ago
it works…..thakssss
about 1 year ago
hi!
i do the same as you told but nothing happens ink level is same and not changed
will you tell me if i refill the cartridges how i can reset the chip of that
thanks
about 1 year ago
@Abid,
Are you sure that you have a problem with waste pad? This software for reset protection counter.
If you refill the cartridge and want to reset the chip then buy chip resetter and reset it.
Hope this help.
about 3 months ago
downloaded it and followed the steps… but during initialization it says communication error… done it many times… but still it said the same thing… im using vista… hope someone can help…
about 3 months ago
Hi benzley,
could you tell me what is your OS and which printer you are trying to reset to.
cheers
about 3 months ago
hello… im using vista, but wen i used a pc with xp it worked… tnx… im resetting an epson 1390…
about 3 months ago
Thanks for the feedback, benzley.
I will update the post that the software only works for windows xp.
cheers